1. Clean Pipes in Garage & 2. Power Wash Walls
Pipes will be dusted if requested. Pillars, columns, and walls will be power washed if requested.
3. Power Sweep (Tennant 8410 & Burlap Bag Disposal)
Floors are power swept with a Tennant 8410 Sweeper or Scrubber with dirt and dust collected, shoveled into burlap bags and then disposed of.
4. Treat Oil Stains (Citrus Biodegradable Degreaser)
Our eco-friendly degreaser used is citrus-based, water soluble, non-toxic and bio-degradable:
- Concrete floors: Oil stains are pre-treated with degreaser.
- Urethane or Epoxy floors: Oil stains are pre-treated with degreaser and then the floor surface is scrubbed using a solution of water and our citrus-based degreaser.
- Petroleum-based floors (asphalt or mastic membrane): Not normally treated with degreaser because you cannot take oil out of an oil-based membrane. We will, however, apply degreaser if requested, to oil stains.
5. Power Scrub Urethane Floors & 6. 3,500 PSI Power Wash
Urethane membrane floors will be power scrubbed by a Tennant 8410 with an onboard soap solution. Floors, ramps, driveways and parking spaces are carefully power washed with water at 3,500 p.s.i. Walls, columns and pillars can also be power washed, if requested.
7. Final Inspection & Signed Work Order
We double check to make sure all requested work is completed to the highest possible standards. Our crew chief meets with the site supervisor for the final inspection and signature on our work order. Our crew doesn’t leave until your site staff agrees that the work was completed to everyone’s satisfaction.